POLYTOPS® Plastic Colour Topped Nails

The self-masking, decorative plastic top of POLYTOPS® polymer headed nails provide a neat and unobtrusive fixing in one quick and simple step. Made from A4 stainless steel or zinc plated mild steel, these plastic topped nails are also corrosion resistant.

With the secure moulded heads made from special tough polymer plastic, the POLYTOPS® nails are shatter resistant to hammer. Every batch is destructively tested to failure on a drop test rig to simulate the product in use on site. A level is set when remedial action must be taken to restore quality.

Their specially designed tapered, annular ring shank provides better gripping characteristics than ordinary smooth nails enabling a stronger holding power and tamper resistance. Poor ring shank can result in less secure installation. We ensure POLYTOPS® polymer head nails offer you a secure fixing by testing pull out force required and therefore their security. These independent tests were carried out at Loughborough University Department of Engineering. POLYTOPS® nails have been accredited with the CE mark in June 2015.

POLYTOPS®  Polymer headed nails Range

Available in different sizes and a wide range of colours, POLYTOPS® nails can be used on a wide range of construction and building applications inside and out. They come in POLYTOPS® branded boxes of 100 pcs.

They are used for fastenings:

  • Fascia & soffits
  • Barge boards
  • Cladding
  • Window & door trims
  • Panelling
  • Skirting, architrave & decking

Pins vs Nails

Generally our plastic topped pins are used for fastening soffits. Whereas the plastic topped nails are used on the fascia. This is due to soffits being thinner boards to fascia so only requiring a 30mm or 40mm pins. Fascia tend to be thicker and require our more heavy duty 50mm or 65mm nails. This is only a general guide. It will ultimately be determined by the thickness of the board that requires fastening and what it is being fastened too.

POLYTOPS® Polymer Headed Nails Technical Specification

POLYTOPS® Nails are CE approved for the intended use with construction products, in accordance with the applicable harmonised technical specification, such as PVC Fascia, Barge Board, Cladding or Trim Fixing.

Under tests A4 stainless steel has been shown to withstand a salt water environment and not experience any corrosion. Under the same tests A2 stainless steel was subject to heavy corrosion which can lead to damage to their surrounding area.

Contact us for more information

Buy now

Additional Information

TypeMaterialsGaugeLength
PinsA4 Stainless Steel, Zinc plated*2mm25mm, 30mm, 40mm
IntermediatesA4 Stainless Steel, Zinc plated*2.65mm40mm, 50mm
NailsA4 Stainless Steel, Zinc plated*3mm40mm, 50mm, 65mm**
*Zinc plated is made for indoor usage only. It is not suitable to be used outside.**Nails are 40, 55 and 65mm in A4 stainless but only 40mm for zinc plated.
SampleAve. Pull Out ForceMax Pull Out ForceMin Pull Out Force
25mm Pin68kg75kg57kg
40mm Nail140kg168kg124kg
65mm Nail295kg315kg275kg